Product Description
Product Description
About Nylon:
It has the advantages of high mechanical strength, excellent wear resistance, corrosion resistance, anti-aging, self-lubricating, light weight, sound absorption and shock absorption, and non-toxicity.
The comprehensive mechanical properties are far superior to general engineering plastics and are ideal materials for replacing copper, stainless steel and other non-ferrous metals.
| Name | Customized Size Plastic Gear Nylon Spur Gears MC Nylon Gear Wheel |
| Material | MC,PA6 |
| Color | White,black,green,nature,blue,custom,etc |
| Condition | Custom |
| Shape | Round,guide rail |
| Packing | Wodden case,Pallet,or according to your requirement |
| We Supply gear types: spur gears, helical gears, herringbone gears, and curved gears,etc. | |
| We are manufacture factory, we produce gears according to our customers’ Requirement. | |
| The price of this product and the freight cost are only for reference, and the specific price is subject to the customer service quotation | |
| Other |
24 hours instant and comfortable customer service.
Shipping status notification during delivery.
Regular notification of new styles & hot selling styles.
After-sales: If there are quality or data problems,please contact us without hesitate; we have professional after-sales Service and technical staff work together until the customer is satisfied. |
Product Display
1) Gears can be classified into profile curve, pressure angle, tooth height and displacement according to tooth profile.
2) Gears are divided into cylindrical gears, bevel gears, non-circular gears, racks and worm-worm gears,two-way gears according to their shape.
3) Gears are divided into spur gear, helical gear, herringbone gear and curve gear according to the shape of tooth line
4) According to the surface gear where the gear teeth are located, they are divided into external gear and internal gear. Thetop circle of outer gear is larger than that of root, while the top circle of inner gear is smaller than that of root
Detailed Photos
* Lower cost:
Generally, plastic gears are less expensive to produce than metal gears. As there is usually no need for secondary finishing, plastic gears typically represent a 50% to 90% saving relative to stamped or machined metal gears, according to Plastics Technology.
* Design freedom:
Moulding plastic offers more efficient gear geometries than metal. Moulding is ideal for creating shapes, such
as internal gears, cluster gears, and worm gears, where the cost for forming them in metal can be prohibitive.
* Reduced noise:
The superior noise-dampening properties of plastics result in a quiet running gear. This has made plastics essential for the high-precision tooth shapes and lubricious or flexible materials required in the ongoing quest for quieter drives.
* Lubrication:
The inherent lubricity of many plastics makes them ideal for computer printers, toys, and other low-load situations that require dry gears. Plastics can also be lubricated by grease or oil.
* Corrosion-resistant:
Unlike metal gears, plastic gears are immune to corrosion. Their relative inertness means they can be used
in water meters, chemical plant controls and other situations that would cause metal gears to corrode or degrade.
* Good shock absorption:
Plastic gears are more forgiving than metal because plastic can deflect to absorb impact loads. It also does a better job of distributing localised loads caused by misalignment and tooth errors.
Technological process:
1. Raw material preparation
2. Audit and design drawings
3. Processing products
4. Quality inspection
5. Repair product burr and inventory
6. Packing
Our Advantages
1. We are factory providing CNC service and machining plastic parts
2. Handling components of very tight tolerance and very complex geometry
3. Low MOQ (1pc is even acceptable in some special conditions)
4. Offering free and quick prototyping ( normally 1 week)
5. Sharp on time delivery
6. Top quality guaranteed by skilled workers, managing system and status of facilities.
7. Offering consultancy service on components machining
8. Customized size and spec /OEM available
9. Near ZheJiang and ZheJiang g,HangZhou, convenient transportation.
10, Our custom service for more than 20 years of experience
Better services
1.QC System: 100% inspection on critical dimensions before shipment.
2.Drawing format: CAD / PDF/ DWG/ IGS/ STEP/X-T etc.
3.Packaging: Standardpackage / Pallet or container / As per customized specifications
4.Payment Terms: 30 -50%T/T or Paypal/ Western Union in advance, 70-50% balance before delivery; PayPal or Western Union or T/T is acceptable.
5.Shipment Terms: 1) 0-100kg: express&air freight priority, 2) >100kg: sea freight priority, 3) As per customized specifications
6.Trade terms: EXW, FOB, CIF perfered
Company Profile
HangZhou CZPT Composite Materials Co., Ltd. is located in the Economic Development Zone of HangZhou City, ZheJiang Province. It is 1 of the earliest companies engaged in composite materials, engineering plastics, rubber and plastic products.Company’s main products: POM, MC Nylon, Oil Nylon, HDPE, ABS, PBT, PET, PVC, PC, PU, PP, PTFE, PVDF, PEI, PSU, PPS, PEEK, PAI, PI, PBI.
Our company wide range of accessories processing conditions, such as mass customization production ability, exquisite
manufacturing technology and advanced production equipment, professional technical advice and after-sales service of
products.
Packaging & Shipping
Packing Details : Inner plastic bag,outside carton box,last is the pallet,all are based on the customers’ requirments
Delivery Details : 10-30 days after you confirm the samples
Payment terms: Payment=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us.
FAQ
1. Q: Are you trading company or manufacturer ?
A: We are manufacturer.
2. Q: How long is your delivery time?
A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you.
Usually 2-5 days for CNC machine processing parts. It will take around 2-4 weeks for mold making.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
4. Q: Can you do assembly and customized package for us?
A: We have an assembly factory and can assemble all kinds of plastic, metal and electronic parts for you. For the finished
products,we can customized the retail package and you can sell it directly after receiving them.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Toothed Portion Shape: | Spur Gear |
| Material: | ABS, PP, Nylon, PC, etc. |
| Type: | Circular Gear |
| Raw Material: | PP, PE, HDPE, PTFE, PA, Mc Nylon, POM, etc. |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Design a Forging Spur Gear
Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Forging spur gears
Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.
Set screw spur gears
A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Keyway spur gears
In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.
Spline spur gears
When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears
Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Stainless steel spur gears
There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.
editor by CX 2023-04-20
Worm price made in China – replacement parts – pto drive shaft and Worm Gear Wheel Diameter Shafts Pin Nylon Bore Tooth Brass Stainless Steel for Speed Motor Reductions Transmission Parts Aluminum Bore Tooth Gear Set with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing unit in China with 5 various branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft clutch components Our generate shaft common joints products pto shaft collection 2 are pto adapter tractor source offering drive shaft king effectively 2000 bmw 323i travel shaft in how to measure pto shaft duration Chinese generate shaft hyundai matrix marketplaces getting rid of pto shaft from tractor and 540 pto shaft adapter some goods marketed in worldwide markets are nicely obtained by Chinese and overseas clientele at residence and abroad. We warmly welcome the close friends from all the planet!
Worm and Worm Gear Wheel Diameter Shafts Pin Nylon Bore Tooth Brass Stainless Steel for Pace Motor Reductions Transmission Components Aluminum Bore Tooth Gear Set
The mating worm equipment mounts on a specialised Metal 1/4″ D-Bore Barrel Hub for Worm Equipment to generate a reputable junction between the gear and the shaft it is turning. The worm and the worm equipment are made so that you can run them .75″ apart from one particular yet another the same spacing you may discover on Ever-electrical power and other parts inside the develop system. Apart from the enormous reduction in pace and the improve in torque, these worm gears will lock in spot when at rest so you do not have to fret about an exterior force backdriving the mechanism driving them.
